1 5

ARJ-4045R

ARJ-4045R

$50.00 USD
$50.00 USD
Sale Sold out
Product type
Surface Treatment
  • 2 Pcs / 1 Set, Vacuum Bag
  • Assort with standard RCA.
  • Single point conduction.
  • Fully insulated protection.
  • Will be used for solder type or screw type.
  • High-purity copper(over 99%) made.

Note

This product is suitable for diameter 12 mm circular opening gap of the panel.
This product is suitable for the maximum 3.5 mm thickness of the panel.
The torque for the nut on this product can be reach to maximum 8 (lb-in).

Please noted, it will cause component damage if force to lock tighten too much.

Screws with the finished products.
(3/4 mm 4 screws per each)

Concept

Plug and jack can be assort and unilateral replace with other standard coaxial RCA.

By reducing the size of the conductor and path, to reduce Resistance, Capacitance and Inductance reaction while signal transmit.

Non-coaxial conduction are able to use single point conduction while plug connect to jack

The Jack is made with insulation material which isolated from the metal plate to reduce the impact from external factors.

Terminal was half crosscutting in L shape and a ring with screw. It will be used for solder type or screw type. The conductor use high-purity copper (Tellurium Copper) without nickel plated.

By using highest quality of design techniques and material to provide customer who has "High End" requirement.

Mechanical structure

Signal contact spring fix inside the body with PTFE together by assemble function.
POM covers around the body to isolate the metal panel.
The jack is through the opening gap from inside of the panel, tighten by washers and pentagram nut.
A ring and a screw were temporary locked, also able to adjust into solder type or keep lock directly based on your need.

Assembly

1. Remove the nut [111]and washer[121]

2.1 For solder type: Please remove the ring [311&312] and the screw[321&322] first while soldering cable.

2.2 For screw type: Please remain the ring [311&312] and the screw[321&322].

3. Please put the body [211] through the opening gap from the inside of plate.

4. Please lock the nut and washer on the body, no need to fasten them in order fine tuning later

5.1 For solder type: Please solder the cable(without jacket)

5.2 For screw type: Please lock the cable (without jacket) after loose the screw on the ring. Please turning the body to obtain the space to lock another screw.

6. Please lock the nut.

Specification

Material:
Contact Pin: Copper (C1100 / copper contains over 99.5%)
Grounding: Tellurium Copper (C14500 / copper contains over 99%)
Insulator: PTEF (White)
Shell: POM (Black)
Washer: PE(White / Red)
Nut: Brass alloy (C3604)
Ring: Brass alloy (C3604)
Screw: Brass alloy (C3604)

Finish:
Contact Pin: Rhodium plating (no nickel base)
Grounding: Rhodium plating (no nickel base)
Ring: 120u" Silver plating (no nickel base)
Screw: 120u" Silver plating (no nickel base)

Insulator: None
Shell: None
Washer: None
Nut: Satin Nickel + Topcoat

Electrical Characteristics:
Contact resistance < 0.3 mOhm (It was test by ARP-4045.)

Dimension:
Biggest OD 15.0mm
Total Length 29.0mm

Recommend soldering temperature

Product production process comply with RoHS.

View full details