It can be assort with other standard XLR.
Conductor with the grooving design in order to add the surface area.
Conductor between body isolate by PTFE insulator.
The conductor is made from high-purity tellurium copper without nickel plating.
By using highest quality of design techniques and material to provide customer who has "Hi-End" requirement.
The center pin is fixed to the PTFE insulator by assemble function.
The PTFE insulator fixed on the body by using screw.
The body and the shell locked by screwing.
POM sleeve is fixed with end of shell by using screw.
The cable hole with sleeve is 8.5mm, without sleeve is 12.5mm.
It is suitable with other standard female XLR products which has button.
1.We recommend to peel off the cable jacket and each insulation of conductor.
2. Using the sleeve ( ID8.5mm)  or using the shell without sleeve ( ID12.5mm), depend on the cable outside diameter .
3.Please put the cable through the shell and sleeve .
4.Solder the conductor on each signal pin. 
5.Depends on your need to solder the ground pin.
6.Please lock the shell  on body set 
7. Please fix the cable and shell through screw(M3x6mm)
's 5th channel conductor, as the schematic diagram ,It may means full coverage braided .
Contact Pin: Tellurium copper (#C14500 / copper contains over 99%).
Ground Pin: Brass alloy (#C3604)
Body: Brass alloy (#C3604)
Shell: Brass alloy (#C3604)
Screw: Stainless Steel (SUS304)
Contact pin: 10u" Gold plating (no nickel base).
Shell ground pin: 10u" Gold plating (no nickel base).
Contact pin: Rhodium plating (no nickel base).
Shell ground pin: Rhodium plating (no nickel base).
Contact pin: 120u" Silver plating (no nickel base).
Shell ground pin: 120u" Silver plating (no nickel base).
Body: Satin Nickel + Topcoat.
Shell: Satin Nickel + Topcoat.
Plastic Steel: None.
Contact resistance < 1.0 mOhm
Biggest OD: 18.9mm
Total Length: 46.0mm
Recommend soldering temperature：
Temperature Soldering Iron, please keep 400 degree within 10 second
Temperature Soldering Iron, please keep 450 degree within 05 second
Product production process comply with RoHS