|
ConceptThis product can be use with other binding post which is also suitable with bare wire, banana plug and cable terminal with screw / plug in type.
The body of plug was lathed in one piece to avoid the signal and conduction loss. The interface was designed in arc concave to increase the tightness and contact with bare wire. There is a POM part between knob and body to avoid damage when tighten / assemble each other. By using insulating material between the knob and the body to increasing the overall insulation capability. The shell of the plug is made of insulation material which is able to isolate the contact with metal and reduce the mutual interference. The conductor is made from high- purity copper (Tellurium Copper) with gold plating (10u"). By using high quality of design techniques and material to provide customer who has "High End" requirement. |
|
|
DescriptionMechanical structure:
The body was designed as hollow and lathed in one piece. The body is fixed with the POM on both front and back. The binding post is to be assembled from inside of the panel through the opening, tighten by washer and Hex nut. The special designed of arc concave can increase the tightness and contact with bare wire. Knob use latch mode to keep POM and inner recesses for better adaptation All metal components that contact with the panel are insulated with the body of the plug. The product is suitable with bare wire (D4.0mm), banana plug and cable terminal (6/8mm opening) with screw /plug in type. The product is suitable for panel, for detail dimension, please refer pictures. The products is suitable for the maximum 10mm thickness of the panel. The torque for the nut on this product can be reach to maximum 8 (lb-in). The torque for the back sleeve can be reach to maximum 6 (lb-in). Please note that over-torsion can cause damage for the product. Material: Body: Tellurium Copper (#C14500 / copper contain over 99%) Shell: POM (Black) Washer: PE (Red/ White) Nut: Brass Knobs: Brass Finish: ABI-0601 Body: 10u" Gold plating ( no nickel base) ABI-0601R Body: Rhodium plating (no nickel base) ABI-06061S Body: 120u" Silver plating (no nickel base) Shell: None Washer: None Nut: Satin nickel + topcoat Knobs: Satin nickel + topcoat Electrical Characteristics: Contact resistance < 0.1 mOhm Dimension: Biggest OD: 16.5mm Total Length: 50.0mm Packing: Vacuum Bag(2Pcs/1Set) Product production process comply with RoHS Recommend soldering temperature: Temperature Soldering Iron, please keep 450 degree within 10~15 second Temperature Soldering Iron, please keep 400 degree within 15~20 second Temperature Soldering Iron, please keep 350 degree within 20~25 second |
Contact Us
Address : 36, Lane 63, Kai An Rd., Hoshun Ind. Park, Tainan City 709, Taiwan, R.O.C.
Telephone : +886-6-3553595(Rep.) Fax : +886-6-3553258
E-Mail : sales@aeco.tw
Telephone : +886-6-3553595(Rep.) Fax : +886-6-3553258
E-Mail : sales@aeco.tw